Product Description
Product Description
one. The lifting anchors are utilised for flat concrete slabs and concrete pipes. They are easily and swiftly utilised.
two. Content: 20Mn2A or 20Mn2K. Following heat therapy, which minimal temperature impact on -20 ºC can occur to 27J.
three. Surface treatment method: Simple, electro galvanized and scorching dipped galvanized.
4. The split strength is about 3 moments of doing work load limit.
five. Supply: If no prerequisite of marks on them, we hold 1000pcs to 20000 pcs inventory. If make required marks. shipping and delivery is about in fifteen days.
six. Packing: Knitting bags and plywood cases.
Qingde | Lifting Anchor | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | fifty five | 19 | 25 | 10 | .057 |
one.three | eighty five | 19 | twenty five | ten | .076 |
one.three | one hundred twenty | 19 | 25 | 10 | .097 |
2.five | 55 | 26 | 35 | 14 | .128 |
two.five | eighty five | 26 | 35 | fourteen | .154 |
two.5 | 120 | 26 | 35 | 14 | .196 |
two.5 | one hundred forty | 26 | 35 | 14 | .230 |
2.5 | 170 | 26 | 35 | fourteen | .256 |
two.5 | 240 | 26 | 35 | 14 | .345 |
4.0 | a hundred | 36 | forty five | 18 | .340 |
4.0 | 120 | 36 | 45 | 18 | .360 |
four.0 | one hundred forty | 36 | 45 | eighteen | .392 |
four.0 | a hundred and seventy | 36 | 45 | 18 | .470 |
4.0 | 210 | 36 | 45 | 18 | .536 |
5.0 | seventy five | 36 | fifty | twenty | .330 |
five.0 | 85 | 36 | 50 | 20 | .360 |
5.0 | a hundred and twenty | 36 | 50 | 20 | .440 |
five.0 | one hundred fifty | 36 | 50 | twenty | .520 |
5.0 | one hundred seventy | 36 | 50 | 20 | .560 |
five.0 | 180 | 36 | fifty | twenty | .582 |
five.0 | 210 | 36 | 50 | twenty | .654 |
five.0 | 240 | 36 | fifty | twenty | .724 |
5.0 | 340 | 36 | fifty | 20 | .962 |
7.5 | one hundred twenty | forty seven | sixty | 24 | .730 |
7.5 | 200 | forty seven | 60 | 24 | 1.050 |
7.5 | 250 | 47 | 60 | 24 | one.170 |
7.5 | three hundred | 47 | 60 | 24 | one.360 |
10.0 | a hundred and twenty | 47 | 60 | 24 | .930 |
ten.0 | a hundred and seventy | forty seven | 60 | 24 | one.180 |
ten.0 | one hundred eighty | forty seven | 60 | 24 | 1.210 |
10.0 | 250 | 47 | sixty | 24 | 1.550 |
10.0 | 340 | forty seven | 60 | 24 | one.980 |
10.0 | five hundred | 47 | 60 | 24 | two.720 |
fifteen.0 | 300 | sixty nine | eighty five | 34 | two.850 |
15.0 | 400 | 69 | eighty five | 34 | three.563 |
fifteen.0 | 500 | 69 | 85 | 34 | four.300 |
20 | 340 | sixty nine | ninety nine | 39 | 4.370 |
twenty | four hundred | sixty nine | 113 | 39 | four.990 |
20 | five hundred | 69 | ninety nine | 39 | 5.930 |
32.0 | 500 | 87 | 132 | fifty | ten.500 |
32.0 | seven hundred | 87 | 132 | 50 | thirteen.300 |
32.0 | 1200 | 87 | 132 | fifty | 21.000 |
Qingde | Lifting Anchor double head | ||||
Load rate (ton) | Dimensions (mm) | Bodyweight | |||
h | a | b | d | (kg) | |
1.three | 85 | 19 | twenty five | 10 | .085 |
one.3 | a hundred and twenty | 19 | 25 | ten | .105 |
2.five | eighty five | 26 | 35 | 14 | .175 |
two.five | one hundred twenty | 26 | 35 | fourteen | .218 |
2.five | a hundred and seventy | 26 | 35 | fourteen | .280 |
5.0 | 85 | 36 | fifty | 20 | .464 |
five.0 | a hundred and twenty | 36 | 50 | 20 | .484 |
5.0 | a hundred and seventy | 36 | fifty | 20 | .603 |
5.0 | 240 | 36 | fifty | twenty | .768 |
Qingde | Eye Anchor | ||||
Load rate (ton) | Dimensions (mm) | Bodyweight | |||
h | a | b | d | (kg) | |
1.three | eighty five | 19 | 25 | 10 | .085 |
one.3 | a hundred and twenty | 19 | twenty five | ten | .105 |
2.five | ninety | 26 | 35 | fourteen | .175 |
two.five | a hundred and twenty | 26 | 35 | 14 | .218 |
2.five | 170 | 26 | 35 | 14 | .280 |
5.0 | ninety | 36 | fifty | twenty | .464 |
five.0 | a hundred and twenty | 36 | 50 | twenty | .484 |
5.0 | a hundred and seventy | 36 | 50 | twenty | .603 |
five.0 | 240 | 36 | fifty | twenty | .768 |
ten | 115 | forty seven | sixty | 28 | |
ten | 180 | 47 | sixty | 28 | |
twenty.0 | 250 | 69 | 85 | 38 |
Firm Introduction
FAQ
Q1: what items are you company generating?
We are manufacture numerous sort of hardware items,the normal goods like screws,washers,shafts,springsthe customized items like the stamping elements,cnc turning and milling elements,lathe elements and so on.We are make these components items according to your samples or drawings .
Q2:How do your firm handle the products’ top quality?
Well,as we all know that the quality will come very first during the firms with our customers that we usually persist in “Top quality is the life of company.we are utilizing the very first verified instances, production inspection, packaging seized the complete mix to manage products high quality strictly.
Q3:Are you a manufacture organization or trade organization?
we are a skilled hardware manufacture company with over ten years historical past,we have our possess manufacturing unit with complete components create equipments and specialist engineers that we can create out perfectly items in accordance to your specifications.
Q4:How about your products’ value?
Properly, we are insisting on the “win-win” basic principle.With the most useful value,to aid our clientele to gain much more industry share, so as to win more company.
Q5.Can you do customization if i need to have?
Sure, we can provide custom-made goods as your demands.
Q6: How to purchase?
(1)You send us drawing or sample(2)We have by means of undertaking evaluation(3)We give you a style(4)You feel the layout is okay(5)We make the sample and deliver it to you. (6)You think the sample is excellent then place an purchase and pay out us thirty% deposit(7)We start off to make the item(8)When the goods is accomplished, we provide it to Shengzhen Yiantian(9)You pay out us the balance right after you see the B/L Copy(10)The total buy is done, thank you!!
US $0.15-20 / Piece | |
1,000 Pieces (Min. Order) |
###
After-sales Service: | 1 Year |
---|---|
Warranty: | 1 Year |
Application: | Concrete Precasting |
Certification: | ISO |
Surface Treatment: | Yes |
Technics: | Forged |
###
Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Qingde | Lifting Anchor | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 55 | 19 | 25 | 10 | 0.057 |
1.3 | 85 | 19 | 25 | 10 | 0.076 |
1.3 | 120 | 19 | 25 | 10 | 0.097 |
2.5 | 55 | 26 | 35 | 14 | 0.128 |
2.5 | 85 | 26 | 35 | 14 | 0.154 |
2.5 | 120 | 26 | 35 | 14 | 0.196 |
2.5 | 140 | 26 | 35 | 14 | 0.230 |
2.5 | 170 | 26 | 35 | 14 | 0.256 |
2.5 | 240 | 26 | 35 | 14 | 0.345 |
4.0 | 100 | 36 | 45 | 18 | 0.340 |
4.0 | 120 | 36 | 45 | 18 | 0.360 |
4.0 | 140 | 36 | 45 | 18 | 0.392 |
4.0 | 170 | 36 | 45 | 18 | 0.470 |
4.0 | 210 | 36 | 45 | 18 | 0.536 |
5.0 | 75 | 36 | 50 | 20 | 0.330 |
5.0 | 85 | 36 | 50 | 20 | 0.360 |
5.0 | 120 | 36 | 50 | 20 | 0.440 |
5.0 | 150 | 36 | 50 | 20 | 0.520 |
5.0 | 170 | 36 | 50 | 20 | 0.560 |
5.0 | 180 | 36 | 50 | 20 | 0.582 |
5.0 | 210 | 36 | 50 | 20 | 0.654 |
5.0 | 240 | 36 | 50 | 20 | 0.724 |
5.0 | 340 | 36 | 50 | 20 | 0.962 |
7.5 | 120 | 47 | 60 | 24 | 0.730 |
7.5 | 200 | 47 | 60 | 24 | 1.050 |
7.5 | 250 | 47 | 60 | 24 | 1.170 |
7.5 | 300 | 47 | 60 | 24 | 1.360 |
10.0 | 120 | 47 | 60 | 24 | 0.930 |
10.0 | 170 | 47 | 60 | 24 | 1.180 |
10.0 | 180 | 47 | 60 | 24 | 1.210 |
10.0 | 250 | 47 | 60 | 24 | 1.550 |
10.0 | 340 | 47 | 60 | 24 | 1.980 |
10.0 | 500 | 47 | 60 | 24 | 2.720 |
15.0 | 300 | 69 | 85 | 34 | 2.850 |
15.0 | 400 | 69 | 85 | 34 | 3.563 |
15.0 | 500 | 69 | 85 | 34 | 4.300 |
20 | 340 | 69 | 99 | 39 | 4.370 |
20 | 400 | 69 | 113 | 39 | 4.990 |
20 | 500 | 69 | 99 | 39 | 5.930 |
32.0 | 500 | 87 | 132 | 50 | 10.500 |
32.0 | 700 | 87 | 132 | 50 | 13.300 |
32.0 | 1200 | 87 | 132 | 50 | 21.000 |
###
Qingde | Lifting Anchor double head | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 85 | 19 | 25 | 10 | 0.085 |
1.3 | 120 | 19 | 25 | 10 | 0.105 |
2.5 | 85 | 26 | 35 | 14 | 0.175 |
2.5 | 120 | 26 | 35 | 14 | 0.218 |
2.5 | 170 | 26 | 35 | 14 | 0.280 |
5.0 | 85 | 36 | 50 | 20 | 0.464 |
5.0 | 120 | 36 | 50 | 20 | 0.484 |
5.0 | 170 | 36 | 50 | 20 | 0.603 |
5.0 | 240 | 36 | 50 | 20 | 0.768 |
###
Qingde | Eye Anchor | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 85 | 19 | 25 | 10 | 0.085 |
1.3 | 120 | 19 | 25 | 10 | 0.105 |
2.5 | 90 | 26 | 35 | 14 | 0.175 |
2.5 | 120 | 26 | 35 | 14 | 0.218 |
2.5 | 170 | 26 | 35 | 14 | 0.280 |
5.0 | 90 | 36 | 50 | 20 | 0.464 |
5.0 | 120 | 36 | 50 | 20 | 0.484 |
5.0 | 170 | 36 | 50 | 20 | 0.603 |
5.0 | 240 | 36 | 50 | 20 | 0.768 |
10 | 115 | 47 | 60 | 28 | |
10 | 180 | 47 | 60 | 28 | |
20.0 | 250 | 69 | 85 | 38 |
US $0.15-20 / Piece | |
1,000 Pieces (Min. Order) |
###
After-sales Service: | 1 Year |
---|---|
Warranty: | 1 Year |
Application: | Concrete Precasting |
Certification: | ISO |
Surface Treatment: | Yes |
Technics: | Forged |
###
Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Qingde | Lifting Anchor | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 55 | 19 | 25 | 10 | 0.057 |
1.3 | 85 | 19 | 25 | 10 | 0.076 |
1.3 | 120 | 19 | 25 | 10 | 0.097 |
2.5 | 55 | 26 | 35 | 14 | 0.128 |
2.5 | 85 | 26 | 35 | 14 | 0.154 |
2.5 | 120 | 26 | 35 | 14 | 0.196 |
2.5 | 140 | 26 | 35 | 14 | 0.230 |
2.5 | 170 | 26 | 35 | 14 | 0.256 |
2.5 | 240 | 26 | 35 | 14 | 0.345 |
4.0 | 100 | 36 | 45 | 18 | 0.340 |
4.0 | 120 | 36 | 45 | 18 | 0.360 |
4.0 | 140 | 36 | 45 | 18 | 0.392 |
4.0 | 170 | 36 | 45 | 18 | 0.470 |
4.0 | 210 | 36 | 45 | 18 | 0.536 |
5.0 | 75 | 36 | 50 | 20 | 0.330 |
5.0 | 85 | 36 | 50 | 20 | 0.360 |
5.0 | 120 | 36 | 50 | 20 | 0.440 |
5.0 | 150 | 36 | 50 | 20 | 0.520 |
5.0 | 170 | 36 | 50 | 20 | 0.560 |
5.0 | 180 | 36 | 50 | 20 | 0.582 |
5.0 | 210 | 36 | 50 | 20 | 0.654 |
5.0 | 240 | 36 | 50 | 20 | 0.724 |
5.0 | 340 | 36 | 50 | 20 | 0.962 |
7.5 | 120 | 47 | 60 | 24 | 0.730 |
7.5 | 200 | 47 | 60 | 24 | 1.050 |
7.5 | 250 | 47 | 60 | 24 | 1.170 |
7.5 | 300 | 47 | 60 | 24 | 1.360 |
10.0 | 120 | 47 | 60 | 24 | 0.930 |
10.0 | 170 | 47 | 60 | 24 | 1.180 |
10.0 | 180 | 47 | 60 | 24 | 1.210 |
10.0 | 250 | 47 | 60 | 24 | 1.550 |
10.0 | 340 | 47 | 60 | 24 | 1.980 |
10.0 | 500 | 47 | 60 | 24 | 2.720 |
15.0 | 300 | 69 | 85 | 34 | 2.850 |
15.0 | 400 | 69 | 85 | 34 | 3.563 |
15.0 | 500 | 69 | 85 | 34 | 4.300 |
20 | 340 | 69 | 99 | 39 | 4.370 |
20 | 400 | 69 | 113 | 39 | 4.990 |
20 | 500 | 69 | 99 | 39 | 5.930 |
32.0 | 500 | 87 | 132 | 50 | 10.500 |
32.0 | 700 | 87 | 132 | 50 | 13.300 |
32.0 | 1200 | 87 | 132 | 50 | 21.000 |
###
Qingde | Lifting Anchor double head | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 85 | 19 | 25 | 10 | 0.085 |
1.3 | 120 | 19 | 25 | 10 | 0.105 |
2.5 | 85 | 26 | 35 | 14 | 0.175 |
2.5 | 120 | 26 | 35 | 14 | 0.218 |
2.5 | 170 | 26 | 35 | 14 | 0.280 |
5.0 | 85 | 36 | 50 | 20 | 0.464 |
5.0 | 120 | 36 | 50 | 20 | 0.484 |
5.0 | 170 | 36 | 50 | 20 | 0.603 |
5.0 | 240 | 36 | 50 | 20 | 0.768 |
###
Qingde | Eye Anchor | ||||
Load rate (ton) | Dimensions (mm) | Weight | |||
h | a | b | d | (kg) | |
1.3 | 85 | 19 | 25 | 10 | 0.085 |
1.3 | 120 | 19 | 25 | 10 | 0.105 |
2.5 | 90 | 26 | 35 | 14 | 0.175 |
2.5 | 120 | 26 | 35 | 14 | 0.218 |
2.5 | 170 | 26 | 35 | 14 | 0.280 |
5.0 | 90 | 36 | 50 | 20 | 0.464 |
5.0 | 120 | 36 | 50 | 20 | 0.484 |
5.0 | 170 | 36 | 50 | 20 | 0.603 |
5.0 | 240 | 36 | 50 | 20 | 0.768 |
10 | 115 | 47 | 60 | 28 | |
10 | 180 | 47 | 60 | 28 | |
20.0 | 250 | 69 | 85 | 38 |
Different types of drive chains
There are many different types of drive chains. You should be able to differentiate between roller chains, forged rivetless chains, double chains, flat-top chains, and helical chains by the terms used. This article will provide information on the different types of chains. Then, you can choose the right one according to your needs. If you haven’t purchased a chain yet, read this article to get started. It will also provide information on the pros and cons of each type.
roller chain
There are several differences between drive chains and roller chains, but in essence, the two are functionally similar. The choice of which type to use depends largely on the type of environment it will be exposed to. While roller chains are suitable for clean indoor environments, they are not very forgiving when it comes to rubbing against the rails. Following are the main differences between a drive chain and a roller chain. Using the correct drive chain is essential for a smooth and efficient running machine.
Roller chain drive chains come in many different weights and tensile strengths. For light-duty applications, use a smaller pitch chain. For heavy-duty applications, use larger pitch chains. The design simplicity of these chains makes them ideal for a variety of applications. While they are great for a variety of applications, the durability of these chains makes them ideal for a variety of applications. Some of the main uses of roller chain drive chains are listed below.
When replacing the drive chain, be sure to follow the safety guidelines. The most important thing to remember is not to place the chain on a dirty floor as it may cause stretch or damage. After removing the chain from the sprocket, apply the measured load specified by ANSI to it. If the load exceeds this value, the chain may bend. A suitable load for measuring a drive chain should be at least six links.
While roller chains are usually made of carbon steel, some are made of stainless steel and are used in food processing machinery. In these environments, the chain may be made of stainless steel for lubrication. Brass and nylon are also sometimes used to meet these requirements. Regardless of the application, however, choosing the right drive chain is critical to the success of a roller chain machine. It is important to maintain the proper balance between the roller chain and the machine.
To properly use a roller chain, first determine the size of the sprocket used for the drive. The size of the chain should be smaller than the smallest sprocket to prevent tooth interference and provide adequate winding on the smaller sprocket. A good practice is to choose a drive chain with a center distance of 30 to 50 times the chain pitch. The longest possible center-to-center distance is approximately 80 times the chain pitch but is not recommended for high-speed applications.
Drop forged rivetless chain
Drop-forged rivetless drive chains are made of drop-forged steel components. Their proportions are suitable for strength and lightweight. Forged rivetless chains are generally divided into three types. Each of these types has its own set of important specifications. Key topics include minimum ultimate tensile strength, chain length tolerances, and link dimensions. Read on to learn more about each type and its uses.
One of the main features of forged rivetless chains is that, despite their relatively low price, they are designed to be very durable. The quality of a forged chain depends on the structure and design of the chain. The manufacturer of this type of drive chain is CZPT, which has a large stock of these chains. The chain is proof tested after assembly and comes with a two-year parts replacement warranty.
Forged rivetless chains are available in a variety of pitch sizes and strength grades. They are made of cast manganese or alloy steel and have an average strength of 24,000 to 300,000 pounds. These chains are suitable for automotive, conveyor, and material handling as well as meat packaging, sugar processing, and steel mill applications. They are also widely used in conveying systems. To ensure quality and performance, manufacturers offer a variety of forged chains.
CZPT offers forged CZPT drive chains for fatigue-free operation. The chain includes a solid one-piece forged drive pawl for optimum durability. Chains are available in Figure 8 and in D-shape styles. For more information, please contact CZPT directly. Custom Drop-Forged rivetless drive chains can be ordered. Manufacturers also offer custom chains for specific application needs.
double chain
Duplex drive chains have two sets of rollers instead of one, producing twice the power. Double chain roller chains have pins and roller bearings, while triple chain chains have an extra row of plates to accommodate the three sprockets. They are usually interchangeable with each other. They are available for US, UK, and ISO standards. They are made of carbon steel, stainless steel, and nickel or nickel-plated.
flat top chain
Flat-top drive chains are ideal for curved or straight tracks and come in many different types and thicknesses. These chains are highly resistant to wear and are usually made of steel, stainless steel, or plastic. CZPT manufactures special brands of flat-top chains with high wear resistance and excellent noise reduction. In addition to being versatile, flat-top chains can be used in a variety of industrial applications.
There are two main types of CZPT chains: solid top or raised rib. One piece is formed from a single unit link and the other has roller base links for added strength. The two-piece chain combines flat tabletop links and a roller bottom chain for added strength. These chains are available in widths up to 20 feet and are available in a variety of widths. These chains are available in stainless steel, cast iron, or plastic.
The hinge pin is another important part of the flat top chain system. Support chain plate to ensure smooth conveying. The hinges are available in single hinge pin and double hinge pin styles. Standard hinge pins are designed for straight, narrow-width chainplates; double hinge pins are designed for longer, heavier products. The hinge pins also come in many different materials, including aluminum and galvanized steel. This allows for customization based on machine design, operating conditions, and drive method.
Whether your flat-top chain conveyor system is large or small, a high-quality flat-top chain will get the job done. With their low maintenance and low maintenance design, these chains are easy to clean and maintain. They can accommodate workpiece pallets of various sizes, and their flexibility makes them ideal for many different applications. They can also be highly customized for various industries. So if you need an industry-specific conveyor, then a flat-top drive chain is the way to go.
editor by czh 2022-12-20